Skip to main content

TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X
Our website uses cookies and other technologies to ensure you get the best browsing experience.

You can change your cookie settings at any time.

Find out more on how we use cookies.

New Line of PICCO Inserts and Holders with Improved Coolant Supply
NPA 19/2019 INCH


PICCO-CUT-Jet


Highlights
  • New line of PICCO inserts for internal machining applications featuring coolant through system
  • New PICCO holders with improved cooling supply
  • New PICCO ACE holders with improved cooling supply and superb clamping rigidity


Overview
Following the ongoing evolution of the miniature market and demand for improved performance, ISCAR is launching a new PICCO line featuring excellent coolant supply. The new line consists of popular geometries of inserts and holders for a wide range of internal machining applications.

Inserts
  • Inserts in existing geometries for turning, grooving, threading, chamfering, profiling and face grooving applications
  • Coolant through supply close to the cutting edge for improved tool life and chip control
  • All inserts are available in grade IC908
  • Inserts with popular geometries are available as standards. Other geometries can be supplied upon request as specials
  • Designations - PICCO R/L...N
  • Clamping flat is on top of insert’s shank
  • The new inserts do not fit into the older type PICCO or MG PCO bars


 


Holders
PICCO …N style
  • Double sided holders enable the mounting of 2 different insert shank sizes, one on each side
  • 2 cooling holes ensure sufficient coolant supply to the cutting zone
  • Designations - PICCO...N
  • 2 clamping screws are located on top of the to provide an additional clamping option, especially on table machines where tools are assembled horizontally
PICCO ACE …N style
  • User-friendly mechanism with no falling parts
  • Fast insert indexing
  • Improved coolant supply directed to the cutting zone
  • Clamping orientation flexibility enables the operator to mount/dismount the insert from any desired orientation
  • Extremely high clamping repeatability of .0002”
  • Manual clamping can be used (without using a wrench) for most applications
  • Clamping with a standard SW15 wrench is required for back turning or high-pressure coolant applications
  • Designations PICCO ACE...N


TEST REPORT
Application: Turning
Part material: SAE 4340
Bore diameter: .236”
Cooling pressure: 150PSI
  ISCAR ISCAR
Tool PICCO ACE 16-5 PICCO 16-4-5N
Insert PICCO R 050.5-20 IC908 PICCO R 050.5-20N IC908
Cutting speed Vc (sfm) 262 262
Feed rate f (ipr) .0016 .0016
Depth of cut ap (inch) .0047 .0047
Tool life (pcs/corner) 55 80
 


PICCO R 050.5-20 + PICCO ACE 16-5
PICCO R 050.5-20N + PICCO 16-4-5N
Tool life ( min)


PICCO ACE-N
Holders for PICCO-JETCUT Inserts with Internal Coolant Channels
• Holders are suitable for right and left-hand PICCO inserts


PICCO-N (holder)
Holders for PICCO-JETCUT Inserts with Internal Coolant Channels
• Holders are suitable for right- and left-hand inserts, and boring bars


PICCO R/L 050, 053, 055-N (Turning)
Inserts with Internal Coolant Channel for Internal Turning and Chamfering
(1) Cutting depth maximum
 


PICCO R/L 050, 053, 055-N (Turning) (continued)
Inserts with Internal Coolant Channel for Internal Turning and Chamfering
(1) Cutting depth maximum

 



PICCO R/L 050-NC (Turning, with Chipbreaker)
Inserts with Chipformers and Internal Coolant Channel for Internal Boring and Profiling
• All left-hand inserts on request
(1) Cutting depth maximum

 



PICCO R/L 090-N (Turning 90°)
Inserts with Internal Coolant Channel for Internal Turning and Profiling
(1) Cutting depth maximum

 



PICCO R/L 090-N (Turning 90°)
Inserts with Internal Coolant Channel for Internal Turning and Profiling
(1) Cutting depth maximum

 



PICCO R/L 047-N
Inserts with Internal Coolant Channel for Internal Deep Profiling
• Left hand inserts on request
(1) Cutting depth maximum

 



PICCO R/LHD 050-N (Turning for Hard Steel)
Inserts with Internal Coolant Channel for Internal Turning and Chamfering of Hard Steel - up to 65 HRC
(1) Cutting depth maximum

 



PICCO R 050-N (Turning with CBN)
CBN Tipped Inserts with Internal Coolant Channel for Internal Turning, Profiling and Chamfering of Hard Steel
• It is not recommended to use coolant when machining with CBN tipped tools
• Available on request only
(1) Cutting depth maximum

 



PICCO R/L 080-N (Back Turning)
Inserts with Internal Coolant Channel for Internal Back Turning
(1) Cutting depth maximum

 



PICCO R/L 002-007-N (Grooving and Turning)
Inserts with Internal Coolant Channel for Internal Grooving and Turning
• All carbide bars with sharp corners
(1) Cutting depth maximum

 
PICCO R/L 002-007-N (Grooving and Turning) (continued)
Inserts with Internal Coolant Channel for Internal Grooving and Turning
• All carbide bars with sharp corners
(1) Cutting depth maximum

 



PICCO R/L 004-007-N (Full radius)
Full Radius Inserts with Internal Coolant Channel for Internal Profiling
(1) Cutting depth maximum

 



PICCO R/L 004-007-N (Full radius)
Full Radius Inserts with Internal Coolant Channel for Internal Profiling
(1) Cutting depth maximum

 



PICCO R/L 070-N (Back Chamfering)
Back Chamfering Inserts with Internal Coolant Channel for Pre-Parting Operations
• All carbide bars with sharp corners
(1) Cutting depth maximum

 



PICCO R/L 520-N (Chamfering)
Inserts with Internal Coolant Channel for Internal Chamfering
• Left hand inserts on request

 



PICCO-010/610-N (Face Grooving)
Inserts with Internal Coolant Channel for Face Grooving
• Only right-hand inserts are available as standard
• All carbide bars with sharp corners
(1) Minimum axial grooving diameter

 



PICCO-010-N (Full Radius for Face Grooving)
Inserts with Internal Coolant Channel for Round Profile Face Grooving
• Only right-hand inserts are available as standard, left-hand inserts on request
(1) Minimum axial grooving diameter

 



PICCO-620-N (Face Grooving along Shaft)
Inserts with Internal Coolant Channel for Grooving along Shaft Dmin .236"
• Only right-hand inserts are available as standard, left-hand inserts on request
• All carbide inserts are with sharp corners
(1) Minimum axial grooving diameter

 



PICCO-015-N (Face Grooving)
Inserts with Internal Coolant Channel for Deep Face Grooving
• Only right-hand inserts are available as standard, left-hand inserts on request
• All inserts are with sharp corners
(1) Minimum axial grooving diameter

 



PICCO-016/020-N (Face Grooving)
Inserts with Internal Coolant Channel for Deep Face Grooving
• All inserts have two coolant holes which may be used with coolant pressure up to 1450 PSI
(1) Minimum axial grooving diameter

 



PICCO-55°-N (55° Threading)
Inserts with Internal Coolant Channel for 55° Internal Threading Profile
• All mini-bars have sharp corners
(1) Threads per inch maximum
(2) Threads per inch minimum

 



PICCO R/L60°-N (60° Threading)
Inserts with a 60° Internal Thread Profile and Internal Coolant Channel for .094" Min. Bore Diameter
(1) Thread pitch

 





The NPA19-inch-2019's pdf file: View (PDF) or Download (ZIP)