Highlights

The competitive ISOTURN market requires ISCAR to seek constantly new innovative solutions while providing conservative customers the confidence to continue using existing ISO products.
To fulfill these needs, ISCAR has developed a new combination system that enables clamping small size negative inserts into standard ISO holders (both ISCAR and competitors) with the use of a simple and economic kit.

Take a standard ISO tool, replace the seat and the lever with the ones provided in the kit, and you obtain a tool that can clamp proprietary inserts such as FLASH-TURN, LOGIQ4TURN and DOVEIQTURN.



ISCAR continues to develop the ISOTURN line by adding new accessories to fit standard smaller ISO turn inserts such as CNMG 33..WNMG 33..SNMG 33… and LOGIQ CXMG 33.. into standard holders for the CNMG 43.., WNMG 43.. and SNMG 43… inserts.

In order to avoid confusion and simplify assembly, all accessories have been divided into separate sets for the indicated geometry.

The following tools can accomodate the following set combinations:




User Friendly Sets for Simple Assembly



The following test reports show a comparison between combination systems and standard tools

	ISCAR	ISCAR
Workpiece Material	AISI 4340	AISI 4340
Operation	Turning	Turning
Insert	WNMG 432-M3P IC8250	WNMG 332-M3P IC8250
Cutting speed Vc (SFM)	660	660
Feed rate f (inch/rev)	0.014	0.014
Depth of cut ap (inch)	0.12	0.12
Tool	PWLNL 16-4	PCLNL 16-4with adapter
Tool life (min)	18	18

DISPLACEMENT TEST

Application: Interrupted Material: AISI 1045 ap =0.12” f =0.012 inch/rev Vc =660 SFM	Application: Continuous Material: AISI 4340 ap =0.12” f =0.014 inch/rev Vc =660 SFM
Z Displacement Passes [inch]	Y Displacement Passes [inch]
PCLNL 16-14 (tool with pocket adapter)	PCLNL 16-14 (tool with pocket adapter)

The NPA017-2019's inch pdf file: View (PDF) or Download (ZIP)