Highlights

The competitive ISOTURN market requires ISCAR to seek constantly new innovative solutions while providing conservative customers the confidence to continue using existing ISO products.
To fulfill these needs, ISCAR has developed a new combination system that enables clamping small size negative inserts into standard ISO holders (both ISCAR and competitors) with the use of a simple and economic kit.

Take a standard ISO tool, replace the seat and the lever with the ones provided in the kit, and you obtain a tool that can clamp proprietary inserts such as FLASH-TURN, LOGIQ4TURN and DOVEIQTURN.



ISCAR continues to develop the ISOTURN line by adding new accessories to fit standard smaller ISO turn inserts such as CNMG 09..WNMG 06..SNMG 09… and LOGIQ CXMG 09.. into standard holders for the CNMG 12.., WNMG 08.. and SNMG 12… inserts.

In order to avoid confusion and simplify assembly, all accessories have been divided into separate sets for the indicated geometry.

The following tools can accomodate the following set combinations:




User Friendly Sets for Simple Assembly



The following test reports show a comparison between combination systems and standard tools

	ISCAR	ISCAR
Workpiece Material	AISI 4340	AISI 4340
Operation	Turning	Turning
Insert	WNMG 060408-M3P IC8250	WNMG 060408-M3P IC8250
Cutting speed Vc (m/min)	200	200
Feed rate f (mm/rev)	0.35	0.35
Depth of cut ap (mm)	3	3
Tool	PWLNL 2525M-06X	PCLNL 2525M-12 with adapter
Tool life (min)	18	18

DISPLACEMENT TEST

Application: Interrupted Material: AISI 1045 ap =3 mm f =0.3 mm/rev Vc =200 m/min	Application: Continuous Material: AISI 4340 ap =3 mm f =0.35 mm/rev Vc =200 m/min
Z Displacement Passes [mm]	Y Displacement Passes [mm]
PCLNL 2525M-12 (tool with pocket adapter)	PCLNL 2525M-12 (tool with pocket adapter)

The NPA017-2019's pdf file: View (PDF) or Download (ZIP)